skip to main text

Uneven or Streaked Colors

Uneven Colors

Streaked Colors

  1. Check1 Make sure joint button is not lifted up.

    Push the print head locking cover (A) to make sure the print head is installed properly.

    Next, push the joint buttons (B) firmly to the end.

    Important

    • Make sure that the orange label and the protective tape have been removed, when installing the print head

    • Do not open the print head locking cover (A) carelessly. The ink may leak out.

  2. Check2 Check paper and print quality settings.

  3. Check3 Are the print head nozzles clogged?

    Print the nozzle check pattern and make sure that the ink is coming out normally.

    For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see If Printing Is Faint or Uneven.

    Watch the movie
    1. Step1 Print the nozzle check pattern.

      After printing the nozzle check pattern, examine the pattern.

      If the pattern is not printed correctly, go to the next step.

    2. Step2 Clean the print head.

      After cleaning the print head, print the nozzle check pattern and check the result.

      If it still does not improve, go to the next step.

    3. Step3 Clean the print head again.

      After cleaning the print head again, print the nozzle check pattern and check the result.

      If it still does not improve, go to the next step.

    4. Step4 Clean the print head deeply.

      After cleaning the print head deeply, print the nozzle check pattern and check the result.

      If it does not improve, turn off the printer, wait for more than 24 hours, and go to the next step.

    5. Step5 Clean the print head deeply again.

      After cleaning the print head deeply again, print the nozzle check pattern and check the result.

      If it still does not improve, go to the next step.

    6. Step6 Perform ink flush.

      After performing ink flush, print the nozzle check pattern and check the result.

      Ink flush consumes a great amount of ink. Frequent ink flush can rapidly consume ink, so perform it only when necessary.

    If the nozzle check pattern is not printed correctly even after performing ink flush, check the installing condition of the print head.

    Important

    • Performing ink flush when the remaining ink level is not enough may damage the printer.

      Before performing ink flush, check the remaining ink level of all colors.

  4. Check4 Perform print head alignment.

    Watch the movie

    Note

    • For Windows, if the problem is not resolved after performing the print head alignment, perform print head alignment manually from your computer.

Note

  • Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern is printed correctly.